Hello guys. I just tried to calibrate on soilmodels. I´ve done three CIUP-REC-test plus one oedometric test. As you can see in the images, that there is still something quite wrong. Can someone help me with a clue please? ps. The Image Shows only two CIUP-REC, thats because i tried to detect my mistake
Looking for help
Related Articles
-
Velacs Project Data
WaiChing Sun||Constitutive Modelling|1 |Views 4,079
Dear colleagues, I want to ask your help — does anyone know where we can find all the test data from the old Velacs Project? If so, that would be […] -
Implimentation of SANISAND constitutive model in ABAQUS/Standard for a soil-monopile interaction
philip alkhoury||Constitutive Modelling|4 |Views 5,223
Dear all, I am trying to model soil-monopile interaction (3D) in ABAQUS/Standard in order to perform subsequently a cyclic and dynamic analysis. For the soil I am using the SANISAND […] -
need help in Flac3d6
Ahmed Mahir||Constitutive Modelling|0 |Views 4,135
dear user hello i intend to build a numerical model using flac3d 6 software i build the geometry with extrusion pane and set all values for pile – soil interaction […] -
stress order in hypo umat seems to be incorrect
Ran Tu||Constitutive Modelling|3 |Views 482
Dear forumers: Thanks to hypoplasticity sand UMAT provided by Prof. Masin — https://soilmodels.com/download/plaxis-umat-hypoplas-zip/. But during studying above sand UMAT, I found that the stress order may be incorrect. Because stress […] -
Sanisand umat with BV problem
Luis Aviles||Constitutive Modelling|0 |Views 3,872
Hi, Does someone know if sanisand implementation has been used in a boundary value problem for slope? do you have any references? Thanks very much! -
Hypoplastic model for Granular soil
Naveen Meena||Constitutive Modelling|5 |Views 4,979
Hello everyone, Could you please anyone tell me that how I can define the hypoplastic constitutive model for granular soil in ABAQUS 6.13. With Regards, Naveen. -
The GA-cal software for the automatic calibration of soil constitutive laws
Francisco Mendez||Constitutive Modelling|2 |Views 6,213
I am happy to announce that our pre-print paper, “The GA-cal software for the automatic calibration of soil constitutive laws: a tutorial and a user manual”, is available on researchgate […] -
UMAT Code for Modified Cam Clay model
Mehtab Alam||Constitutive Modelling|2 |Views 5,082
I am trying to develop UMAT code for MCC, but facing difficulty. Is there any such files available which can help me to speed up. please refer. Thank you.
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
Hi Axel, in fact, your experimental results are quite untypical, as dilatancy starts from the very beginning of the shear experiments (normally, certain compression takes place first, as predicted by the model). I am not sure whether there could be some experimental issue in this but in any case I would consider predictions quite good, it would be probably quite hard to get better predictions using manual calibration. You can try to compare both sand and clay models to see the difference.
Thanks for your quick reply. Ich changed the signes because the template says that dilatancy should be negative. So after changing it the other way around I got still the same results. I was wondering, why it doesnt show anything in the strain chart?
It is undrained test, right? So volume strains are zero
That´s right. Thanks a lot
Kind regards