Our article published in the latest issue of Ground Engineering 10/2017. Great combination of cone-pressueremeter-testing (CPM) by FUGRO and advanced 3D Fem modelling by GEOLINK using hypoplastic constitutive equations to define coordinates for the climbing formwork of the new ship lift. Determination of material and state parameters truly based on back-calculation of field and lab tests. Monitoring data in the course of the obeseravational method confirm the realistic behaviour of the numerical model.
Tags: tochnogCalculation of coordinates of climbing formwork using hypoplasticity and pressuremter tests
Related Articles
-
ABAQUS modeling: Warning about unconnected regions when using hypoplasticity subroutine
Jasmine Lokesh||Finite Elements|0 |Views 4,733
I ran a simple 3D model with symmetry boundary conditions first using elastic material and then as hypoplastic using a subroutine. However, in the former case, I don’t get the […] -
Abaqus OneAPI Compiler
Kassem Dib||Finite Elements|1 |Views 7,765
Hello.. I am testing SaniSand constitutive model as published by Mr. Masin at this site. The Abaqus is V21 and the visual studio 2017 with OneAPI compiler, the Abaqus verification […] -
Skin friction along depth of pile
Md Shafiqul Islam||Finite Elements|0 |Views 3,365
Dear all, I am simulating static pile load test in the rock by using ABAQUS. For comparison of numerical results with the experimental, I need skin friction vs depth plot. […] -
Modeling of granular soil by using UMAT hypoplastic in Abaqus
Naif Alsanabani||Finite Elements|5 |Views 4,031
Dear all I am using the UMAT of hypoplastic model for simulation soil (3D modeling) under cyclic loading. The analysis was completed at geostatic step. But for consolidation step (soil, […] -
Hypoplastic model for thermal cycles in clay (Abaqus)
Sherif Gomaa||Finite Elements|2 |Views 5,379
Dear all, I’m using the UMAT file in which the hypoplastic model for thermal cycles is implemented. I have done some runs for an axisymmetrical model for a single energy […] -
Hypoplasticity sand convergence issues
anis kheffache||Finite Elements|0 |Views 3,455
Hi everyone, i am modeling laterally loaded monopile using abaqus, My 3d model looks like this, only half of the model is simulated, symmetry boundary conditions is applied to the […] -
Problem with Hypoplastic Vumat use with CEL in Abaqus
Abdulkader ELHAJ||Finite Elements|0 |Views 3,380
Hello all, I am currently working on the FE modeling of anchors installation into the soil using the CEL analysis in Abaqus. I tried to use the hypoplastic vumat for […] -
HP clay subroutine in Plaxis
muhammad shakeel||Finite Elements|5 |Views 4,073
Dear Prof. Masin and Soil Model Community, I am using HP clay subroutine in Plaxis 3D to simulate soil structure interaction problem. I want void ratio and OCR variation along […]
0 Comments
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Ramon Varghese on Hypoplastic Interface Model: Does anybody implemented this model in FLAC3D
- Jh Xue on UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver