Hi everyone, I would like to ask if anyone has an example umat file for me to study to work on my master thesis researches. I would like to create a soil foundation for a pavement which is both moisture and stress dependent. There have been some good papers about this topic too but I could not succesfully start writing the Fortran code required. I will really appreciate your help.
If anyone is also interested for proffesional help for this topic can feel free to contact me too.
ABAQUS-UMAT Help
Related Articles
-
Problem in calculating Lateral displacement of the pile using Hypoplastic clay model
arsalan Ahmad||Finite Elements|4 |Views 3,329
Hy Professor David, I am trying to verify the result of one of your paper by the title ‘Cyclic lateral response and failure mechanisms of semi-rigid pile in soft clay: […] -
Geostatic method for Abaqus/Explicit
Joe Chu||Finite Elements|3 |Views 4,843
Dear all, I recently conducted a numerical simulation of pile-soil interaction. I digged a vertical hole and insert the pile into that with general contact. Due to many reasons, I […] -
DIANA 10.4 released with full Geotechnical possibilities 3D as always, but now also 2D!
Ab van den bos||Finite Elements|0 |Views 3,430
We are pleased to announce that DIANA 10.4 is released with full 2D geotechnical possibilities. DIANA is already easy to use for full 3D geotechnical models, and now the more […] -
Consideration of Ko using HP clay model
muhammad shakeel||Finite Elements|1 |Views 3,465
Dear SoilModels community Dear Prof. Masin / all I want to know how HP model considers Ko variation for the following cases: Ko with variation with OCR? Ko determination related […] -
Problem in simulating CPT using SANISAND04
an zhanng||Finite Elements|6 |Views 1,452
I have a question regarding the simulation of cone penetration tests using the SANISAND04 model. I have observed that the parameter m (yield surface size)has a significant impact on the […] -
Free Tochnog Professional list of capabilities and papers
Dennis Roddeman||Finite Elements|0 |Views 3,355
Dear All, you can find a list with some of Tochnog Professional capabilities and application papers at: http://www.tochnogprofessional.nl/Tochnog_Professional_wikipedia_format.pdf Stay safe, Dennis Roddeman -
Tochnog Professional overview movie in youtube
Dennis Roddeman||Finite Elements|0 |Views 3,275
Dear All, We posted a small overview movie of Tochnog Professional in YouTube. For more movies see the complete channel. -
Calibrate hypoplastic model
sahar saab||Finite Elements|2 |Views 3,354
I am trying to calibrate my sand using Excalibre. I tried some triaxial element tests using Abaqus. However the results are different between Excalibre and Abaqus.
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
- Leo Alibert on MSE walls design in Plaxis
- Ignacio Zuloaga on MSE walls design in Plaxis
- Giada Orlando on Problem with VUMAT interface
Dear Mehmet,
please have a look into the Models section, there you can find a couple of different UMATs for Abaqus as inspiration.
kind regards,
Hans Henning
Hello
adding to Hans’ advice:
subscribe to and seek assistance from the
ABAQUS mailing list
https://groups.yahoo.com/neo/groups/Abaqus/info
Search the archive of the list before posting in it.
Or
http://www.eng-tips.com/threadminder.cfm?pid=799
or from the ResearchGate discussion forum.
For advice on mechanics in general, including modeling,
you can consult
http://imechanica.org/
As an introduction get the file
http://imechanica.org/files/Writing User Subroutines with ABAQUS.pdf
Good luck
Frank