Hello All, I am trying to simulate the seismic liquefaction in Abaqus. Can you please help me to model this.
Best Regards’
Saqib
||Finite Elements|2 |
||Finite Elements|2 |
Related Articles
-
Tochnog Professional 100 element free version, www.tochnogprofessional.nl
The Tochnog Professional finite element program is now available as free version with 100 elements. It can be downloaded without registration from http://www.tochnogprofessional.nl. Several commercial and free pre- and postprocessors […] -
Transient Dynamic analysis (U-P formulation)
Hi everyone, i want to carry out some transient dynamic analysis. as far as I know, dynamic steps in abaqus does not allow for pore pressure build-up and dissipation, and […] -
Micropiles load tests database
Hello, This Abou Alhaija Majd, Ph.D. student at Technical University of Civil Engineering Bucharest, i am looking for Micropiles load test data to be used for calibration in my study, […] -
Hypoplasticity sand convergence issues
Hi everyone, i am modeling laterally loaded monopile using abaqus, My 3d model looks like this, only half of the model is simulated, symmetry boundary conditions is applied to the […] -
Calibrate hypoplastic model
I am trying to calibrate my sand using Excalibre. I tried some triaxial element tests using Abaqus. However the results are different between Excalibre and Abaqus. -
Skin friction along depth of pile
Dear all, I am simulating static pile load test in the rock by using ABAQUS. For comparison of numerical results with the experimental, I need skin friction vs depth plot. […] -
Hypoplastic model for thermal cycles in clay (Abaqus)
Dear all, I’m using the UMAT file in which the hypoplastic model for thermal cycles is implemented. I have done some runs for an axisymmetrical model for a single energy […] -
Geostatic method for Abaqus/Explicit
Dear all, I recently conducted a numerical simulation of pile-soil interaction. I digged a vertical hole and insert the pile into that with general contact. Due to many reasons, I […]
Supporting Organisations
Recent posts
-
Degradation ( disturbance ) of hypoplastic clay 23.4.2024
-
Degradation ( disturbance ) of hypoplastic clay 23.4.2024
-
Paper of Coulomb, C. A. (1773) 15.4.2024
-
ABAQUS UMAT of hypoplastic clay model 6.4.2024
-
Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
-
UMAT for Creep-SCLAY model. 1.3.2024
-
Cyclic tests with Triax element test driver 14.2.2024
-
SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
-
COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
-
MSE walls design in Plaxis 11.12.2023
-
sand liquefaction modelling in Anura3D 8.12.2023
-
BCV bentonite experimental and modelling datasets 14.11.2023
What do you want to model?
a big soil block with signal at bottom and boundary conditions at bottom and sides?
a triaxial test?
a shear test?
I want to simulate the liquefaction phenomenon on a soil block. Not either traixial or shear test.