Hello Everyone,
I am trying to implement an unsaturated soil model (BBM or similar) in ABAQUS using UMAT. We want to assign a pore-pressure boundary condition for simulating the drying or wetting process. Consequently, a transient flow takes place through the domain. We aim to observe volume deformation due to changes in suction. However, UMAT does not have direct access to pore pressure or degree of saturation. Is there any way out?
UMAT code for Unsaturated soil modes
Related Articles
-
Small displacements when using HP model in Plaxis 3D
Arno Crous||Finite Elements|4 |Views 3,277
I am modelling sand slopes in Plaxis 3D using an HP model. I am using soil parameters from “Modelling of Soil Behaviour with Hypoplasticity” by David Masin (2019). During the […] -
Vibration foundation behavior
Naif Alsanabani||Finite Elements|0 |Views 4,611
Dear all I have FEM analysis results for vibration foundation response that rested either on saturated salt-encrusted flat soil (case-1) or on finite cemented sand overlie saturated salt-encrusted flat soil […] -
Problem in GRPS embankment simulation In ABAQUS
Bidur Pathak||Finite Elements|0 |Views 3,277
Hi, I am doing Plane strain 2D simulation of GRPS embankment in ABAQUS, i encountered a problem that results of with geogrid and without geogrid both are showing same deflection. […] -
UMAT for hypoplastic subroutine
Naif Alsanabani||Finite Elements|4 |Views 4,109
Hello all, Could you please anyone provide me umat for Hypoplastic model that used as subroutine in Abqus 6.14. With Best Regards Naif Mohammed -
DIANA 10.5 new features
jesus mediavilla||Finite Elements|0 |Views 4,171
DIANA 10.5 was released in 2021. It features many powerful capabilities to model soil-structure interection. See more in https://dianafea.com/2021-DIANA10-5-Release -
Geostatic method for Abaqus/Explicit
Joe Chu||Finite Elements|3 |Views 4,851
Dear all, I recently conducted a numerical simulation of pile-soil interaction. I digged a vertical hole and insert the pile into that with general contact. Due to many reasons, I […] -
HP clay subroutine in Plaxis
muhammad shakeel||Finite Elements|5 |Views 4,072
Dear Prof. Masin and Soil Model Community, I am using HP clay subroutine in Plaxis 3D to simulate soil structure interaction problem. I want void ratio and OCR variation along […] -
Presentations on hypoplasticity applications, D. Mašín, NGI 2017
David Mašín||Finite Elements|0 |Views 5,121
Based on some requests, I share here two presentations on hypoplasticity applications. One is related to simulation of various boundary value problems, the other focuses on simulation of cyclic and […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Jh Xue on UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
You got to write a UEL, not a UMAT