Hi, I wanted to ask if the variables/parameters defined in the online Hypoplastic model manual for PLAXIS (https://web.natur.cuni.cz/uhigug/masin/plaxumat/node6.html) are the same for the ABAQUS UMAT?
Prof. David Masin, I am posting the queries I have emailed you earlier which you have answered and therefore I am posting it here as per your request. I wish […]
Book “Modelling of soil behaviour on hypoplasticity” has been published
||Constitutive Modelling|1 |
Hardcopies of my new book “Modelling of Soil Behaviour with Hypoplasticity – Another Approach to Soil Constitutive Modelling” just arrived. The book is available for hardcover or pdf orders at https://www.springer.com/us/book/9783030039752
Hello everyone, Could you please anyone tell me that how I can define the hypoplastic constitutive model for granular soil in ABAQUS 6.13. With Regards, Naveen.
Dear all I have some laboratory test of Pescara sand and I’m trying to find the von Wolffersdorff parameters of this sand. So I have used ExCalibre with the data […]
I have just returned to Springer proofs of my new book “Modelling of Soil Behaviour of Hypoplasticity – Another Approach to Soil Constitutive Modelling“. It will probably still take few […]
Hi everyone, i am trying to write umat subroutine for multi yield surface plasticity model.if its possible give me some information to do my project better and if some body […]
Hello, I am performing calibration trials for the hypoplastic sand model with the aid of ExCalibre and i was wondering how the deviatoric stresses q for the triaxial test input […]
ALERT Geomaterials (The Alliance of Laboratories in Europe for Education, Research and Technology) is a European organisation including 33 Universities or Organisations, which are most active in the field of numerical […]
Constitutive Model for clayey sand Soils Considering the Effect of Intergranular Physicochemical Forces
||Constitutive Modelling|0 |
Hi all, I’m doing some experimental work to investigate the salinity effect on clayey sand behaviour. Is there any constitutive model considering the physicochemical forces for such materials? Regards, Mehdi
Difficulties in calibration of triaxial test on Hochstetten sand by sand Hypoplasticity model
||Constitutive Modelling|2 |
“A hypoplastic relation for granular materials with a predefined limit state surface” paper by P. A. Von Wolffersdorff April 1996 include a triaxial test result of sample 10cm diameter and […]
Greetings i used interface Vumat with Umat for simulating CEL problem, after 50% of analysis, i got the error as “Excessive incremental rotation of the elements in element set ” […]
Hi everyone, I’m trying to simulate a triaxial test by using Matlab, adopting the sand hypoplasticity model with strain softening but so far couldn’t succeed. Would anyone help me with […]
The constitutive models PM4Sand (Boulanger and Ziotopoulou 2017) and PM4Silt (Boulanger and Ziotopoulou 2018) for plane-strain earthquake engineering applications for sands, and clays and low-plasticity silts respectively are now available […]
Hi Everyone! I am a research Intern at Laval University, my project is about the effect of soil structure interaction on the seismic design of Geostructures. Exactly we want to […]
Hello, I read the research report and the FORTRAN code available at https://soilmodels.com/download/vumat_umatinterface-zip/. It sounds quite interesting but I have a couple of questions about the FORTRAN code: 1- Did […]
Hi, I just came across some problems with the implementation of the “Sand Hypoplasticity Model” in Plaxis. I wanted to to perform a simulation of an oedometer test on a […]
Hi all, I have been trying to code the PM4SAND model for several months, but I faced some problems. I was wondering if there is anyone who worked with this […]
On behalf of the team of developers I am happy to announce that, after more than four years of development and testing, ExCalibre has just been launched. ExCalibre is a […]
Sir, As a beginner of FRIC I am facing some difficulties to implement it. The downloaded FRIC code has been added to my pile soil friction model and trying to […]
1. Download install exe (32 or 64 bit) from https://cygwin.com/install.html 2. Choose a mirror site / click Next and select all packages you need for compiling: Type: “gcc” into search […]
Hypoplastic Interface Model: Virtual Shear Zone Thickness and Surface Rougness Coefficient
||Constitutive Modelling|9 |
Hello, I want to use Hypoplastic Interface (Fric Subroutine) in my ABAQUS contact models. However, I don’t know how I can determine Virtual Shear Zone Thickness. It is the Parameter […]
Dear colleagues, I want to ask your help — does anyone know where we can find all the test data from the old Velacs Project? If so, that would be […]
Hello, I am trying to implement the dll for hypoplasticity in Plaxis 3D. It runs through both the Initial Phase and a Nil Step. However, when it calculates about 20 […]
Dear all I am trying to calibrate the HP for sand, and I have quite comprehensive data. but they are not totally consistent with each other . we have the […]
I would like to derive material parameters based for a simulation which will implement the hypoplastic material model based on the following information: • Heavily overconsolidated • Very dense, fine […]
Not able to run the subroutine ……..error is coming ……UMAT: illegal (negative) actual void ratio detected Can anybody help
I am trying use sanisand subroutine posted in this website. But it is not working. Getting no values for field variable in the odb. I think i am missing something. […]
Who is Online
Supporting Organisations
Recent posts
-
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
-
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
-
Problem with GeoStudio (Seepage) software 16.2.2026
-
Prague Geotechnical Days 2026 3.2.2026
-
Postdoctoral position at COFS, UWA 28.7.2025
-
Hypoplasticity clay in ABAQUS 23.7.2025
-
Drucker-Prager Cap 29.5.2025
-
Abaqus RITSS with hypoplastic 9.4.2025
-
Fellin UMAT subroutine 2.4.2025
-
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
-
Abaqus RITSS methon for LDFE analysis with hypoplastic 17.3.2025
-
Request for VUMAT Implementation of Mohr-Coulomb, Drucker-Prager, or Drucker-Prager Cap 28.2.2025
Recent Comments