Hi, I wanted to ask if the variables/parameters defined in the online Hypoplastic model manual for PLAXIS (https://web.natur.cuni.cz/uhigug/masin/plaxumat/node6.html) are the same for the ABAQUS UMAT?
Tags: hypoclayClay Hypoplastic Model ABAQUS UMAT
Related Articles
-
MSE walls design in Plaxis
Leo Alibert||Constitutive Modelling|2 |Views 676
Hi everyone, this is my first post in this forum. I am collecting initial data on the most appropriate soil model for the analysis of a multitiered MSE wall. I […] -
ABAQUS Linking With Fortran Compiler and Visual Studio
Hashmi Sohawon||Constitutive Modelling|4 |Views 11,660
Hi all, Can somebody recommmend a good detailed guide for the procedures required to link ABAQUS 6.14 to Intel Fortran Compiler and Microsoft Visual Studio? Thank you, Hashmi -
UMAT for Creep-SCLAY model.
isma khabis||Constitutive Modelling|0 |Views 1,356
Does anyone have the UMAT for the Creep-Clay model to be implemented in Abaqus? -
Difficulties in calibration of triaxial test on Hochstetten sand by sand Hypoplasticity model
AKSHAY SAKHARE||Constitutive Modelling|2 |Views 4,483
“A hypoplastic relation for granular materials with a predefined limit state surface” paper by P. A. Von Wolffersdorff April 1996 include a triaxial test result of sample 10cm diameter and […] -
-
UMAT for NorSand
Shile Dong||Constitutive Modelling|0 |Views 4,545
Dear all, I am pretty new in coding and using Abaqus. I have trouble with coding the UMAT for NorSand. If any of you have any good references, please share […] -
SANISAND 2008 Model
MOHD SAQIB||Constitutive Modelling|0 |Views 3,934
Hello Everyone, Can anyone have umat available for SANISAND 08 (Simple anisotropic sand plasticity model)?. Paper authored by Taiebat and Dafalias. They have used a closed type yield surface. Regards […] -
UDSM PLAXIS
nasim aftahi||Constitutive Modelling|2 |Views 4,669
I implemented a unified dynamic soil model, but PLAXIS doesn’t calculate any strains, and it prints zero (or some times NaN amounts) into a text file. I’d like to know […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Jh Xue on UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
Dear Hashmi,
Basically yes, the most of the input you can see that it is identical if you check the subroutine: subroutine check_parms_h in the umat_hcea.for
Best regards,
Hans
Hi Hashmi, yes, they are.
Just for state variables you can use sdvini in Abaqus for their initialisation. But Plaxis way, that is initialisation through parameters, will be functional in Abaqus as well.
thank you for these info!